Processor History
-- A Comparison between Intel and AMD Processors
by Dennis Faas, infopackets editor
http://www.infopackets.com
This week I received a question from one of our visitors which
asked, "What is the difference between the Pentium, Celeron, and
Athlon processors?" To best answer this question, we must first
understand a bit of processor history, starting with Intel's
flagship processor, the Pentium.
In 1993, Intel brought the PC to a new level with the Pentium
processor. The first Pentium processor ran at an astounding 60
Mhz, had 3.3 million transistors, and performed 100 Million
Instructions Per Second (MIPS). Although no one today refers to
the first Pentium processor as a Pentium 1, it is the original of
4 types of Pentium processors developed by Intel.
Once the first Pentium processor technology became obsolete, the
Pentium 2 was introduced. Starting at 266 MHz, the Pentium 2 took
over its sibling's footsteps and was designed to run from 266 MHz
to 450 Mhz. At about the same time, the Intel Celeron processor
was presented; it was identical to the Pentium 2 except it was
considered a "lower end" processor because of two main
differences: a smaller cache and a slower bus speed. Cache is a
special part of the processor which helps to process frequently
used information faster; bus speed (also known as FSB or Front
Side Bus) is responsible for the speed at which all parts of the
computer communicate with each other. Bus speed has a dramatic
effect on overall speed of the computer. In comparison, Pentium 2
processor had a 100 MHz bus, whereas the lower-end Celeron only
operated at a 66 MHz bus.
Not too long after the introduction of the Celeron, the first
Pentium 3 processor replaced the Pentium 2 and ran at 450 MHz.
Both the Pentium 3 and Celeron processors are still in production
today, reaching speeds up to 1260 MHz (or 1.26 GHz) and beyond.
The Pentium 3 bus was first rated at 100 MHz but then increased to
133 MHz beginning with the 500 MHz model processor -- also known
as the "500EB" model.
Even though AMD has been around for quite some time, AMD's
popularity did not come into the spotlight until the introduction
of the Athlon processor. At around the same time that Intel
introduced their 600 MHz Pentium 3 processors, AMD wowed the world
with the Athlon. The Athlon processor not only ran programs just
as well as the Intel Pentium 3 and its predecessors -- its bus
speed also ran twice as fast as the Pentium 3. AMD's
groundbreaking technology utilized a dual bus, even though the
clock-speed (MHz rating) was the same. AMD became a success story
with the Athlon processor and, like Intel, began producing a lower
cost processor -- the AMD Duron -- which also had less cache. In
comparison to Intel's Celeron, the Duron still had a 200 MHz bus,
while the Celeron ran only at a mere 66 MHz.
Today's Processors
As of late, AMD changed their processor architecture once more and
has introduced their new line of Athlon processor: the Athlon XP.
While still an Athlon processor, the major difference with the
Athlon XP is that it does not use the conventional MHz rating to
depict its speed. This is because AMD believes that a MHz rating
would undermine its true performance and therefore wishes to
change public perception. For those who insist of raw MHz
numbers, AMD claims a 25% performance increase of their XP 1900+
compared to a Pentium 4 running at 1900 Mhz.
Since the word about AMD's success spread, Intel recently
introduced the Pentium 4 with a groundbreaking speed of 1400 MHz.
Although the Pentium 4 offers a bus speed of 400 MHz, the
processor is still twice as expensive as the AMD's Athlon XP
processor, while performing roughly the same, if not better.
Summary
The absolute most important aspect of AMD's Duron and Athlon
processors is that they are half the price of Intel's Celeron and
Pentium 3 and 4 processors and still outperform them in almost
every instance.
AMD processors are also popular because they are extremely
overclockable: that is -- with a good motherboard, they are able
to go faster than what they are rated. For example: I own an AMD
Athlon 850 MHz, but have it overclocked and running at 1000 MHz
with a 266 MHz bus. While overclocking is an issue for the more
technically inclined, I will simply state this as another reason
for AMD's popularity.
Here's a quick reference chart depicting processor speeds, and
their respective front side bus (FSB) ratings:
|
Processor |
Speed (MHz) |
Front Side Bus (FSB) |
| |
|
|
|
Pentium 1 |
60 - 233 |
66 MHz FSB |
|
Pentium 2 |
266 -
450 |
100
MHz FSB |
|
Celeron |
300 - |
66 MHz FSB up to Celeron 766 MHz 100 MHz FSB starting with Celeron 800 MHz |
|
Pentium 3 |
450 - |
100 MHz FSB up to Pentium 3 500 MHz 133 MHz FSB starting with Pentium 3 533 MHz |
|
Athlon |
600 -
1400 |
AMD offers both 200 and 266 MHz FSB, depending on the type of RAM used:
200 MHz FSB = SDRAM, 266 MHz FSB = DDR RAM |
|
Pentium 4 |
1400
- |
400
MHz FSB (RDR RAM) |
|
Athlon XP |
1500+ |
266 MHz FSB (DDR RAM) |
Click here for
a list of more
great articles,
just like this one.
If you found this article to be useful, be sure to subscribe to newsletter! Details are below:
[an error occurred while processing this directive]
[an error occurred while processing this directive]
Copyright 2002 | Dennis Faas, infopackets editor |
http://www.infopackets.com |
Computer 411
This article may be freely distributed in email or other online publications, providing that it is not modified in any way.
The article must ALSO include the above line which gives credit to/and includes the URL referring to infopackets.com.
|